MODELS:
DF30 – DF36 – DF48 – DF60 DF30-3 – DF36-3 – DF48-3 – DF60-3 DF30-4 – DF36-4 – DF48-4 – DF60-4

DESIGN FEATURES:
DIAGNOSTIC SETTING:
Troubles Connected With the Surface Burners:
| PROBLEM | POSSIBLE CAUSE | TEST / ACTION |
| OVEN WILL ENTER COOKING MODE BUT NO DISPLAY IN OVEN SELECTOR KNOB | Defective wires from ECH to selector switch | Check connectors by unplugging each end. Then, plug connectors back in and check mode. Still not working, ohm wires on cable from ECH to selector switch. Replace if defective |
| Loose or defective wire harness or connection from selector switch to ECH | Reseat connections. Check continuity of wire harness, replace if defective. | |
| Defective selector switch | Replace selector switch | |
| Defective ECH | Replace ECH |